How to put an ArcEquine on your horse or pony

Before watching the short video, we suggest you read through the notes below and then it will be much easier to follow...

1.      Align the two holes on the liner with the two press studs on the leg strap
2.      Fix the Carbon Pads to the leg strap using the press studs, this will also secure the leg strap liner. Carbon rubber pads should be wiped clean with warm water after each use.
3.      Apply a small amount to the carbon rubber pads, the Conductive Gel ensures good electrical connectivity with the skin. The conductive gel complies with all equine and veterinary regulations, is propylene glycol free and water-soluble.
4.      Once the liner and pads have been attached to the leg strap, insert the Delivery Unit into the strap’s pouch and ensure that the electrical lead is inserted fully into the bottom of the delivery unit. Attach the leg strap with the delivery unit to the outside of the cannon bone, making sure to rotate the strap between healthy legs each day. There is no need to over-tighten the strap, the carbon rubber pads are very sensitive and no significant pressure is required to maintain connectivity. To protect the unit whilst on your horses leg, we advise wrapping with a soft stable bandage.

      - Never strap the device over an open wound or skin irritation.
- The ArcEquine is safe to use on injury’s that have not broken the skin, providing the horse is accepting of this.
- Always rotate the device between legs for each 3 hour treatment.