Before watching the short video, we suggest you read through
the notes below and then it will be much easier to follow ...
1. To switch on the ArcEquine, press and hold the LEFT button until you hear a 'beep'. A GREEN light on the LEFT button indicates the unit is charged and ready for use. A RED light on the LEFT button indicates that the unit needs to be charged.
(If you purchased your ArcEquine unit after August 1st 2016, please watch the other video in this series as the lights on your unit are slightly different - you will find it on YouTube here ...https://www.youtube.com/watch?v=us6yc0GbsFI )
2. Selecting the required treatment programme is also done using the LEFT button. Pressing it briefly will move forward between the programmes - 1, 2, 3, 4, and back to 1, indicated by the small lights at the top. The selected programme will be shown by a RED light.
3. Once you have selected the required programme, pressing the RIGHT button briefly will start the delivery of that treatment programme. The RIGHT button also indicates whether you have a good 'connection' or not. GREEN confirms you have a good connection, whereas RED indicates that you have not - and you will need to adjust the leg strap, perhaps adding more ArcEquine coupling gel to achieve a good connection.
4 After 30 seconds, the light under the RIGHT button will turn OFF to save battery power and the small light at the top will change from 'solid' to 'flashing', and will continue to do so throughout the delivery period.
Briefly pressing the RIGHT button again will turn ON the light under the RIGHT button and the small light at the top will change back to 'solid' for a further 30 seconds.
5. We suggest applying a protective stable bandage or boot over the unit for the treatment period.
6. At the end of the three hour delivery period, the ArcEquine unit will switch itself off, waiting for you to remove it from your horse or pony. If you wish to remove it before the delivery of the treatment is complete, you can switch it off by pressing and holding the LEFT button until you hear a 'beep', then release.
To see how to put an ArcEquine unit onto your horse or pony, take a look at this short video too ... https://youtu.be/95VLhWiRKRM
1. To switch on the ArcEquine, press and hold the LEFT button until you hear a 'beep'. A GREEN light on the LEFT button indicates the unit is charged and ready for use. A RED light on the LEFT button indicates that the unit needs to be charged.
(If you purchased your ArcEquine unit after August 1st 2016, please watch the other video in this series as the lights on your unit are slightly different - you will find it on YouTube here ...https://www.youtube.com/watch?v=us6yc0GbsFI )
2. Selecting the required treatment programme is also done using the LEFT button. Pressing it briefly will move forward between the programmes - 1, 2, 3, 4, and back to 1, indicated by the small lights at the top. The selected programme will be shown by a RED light.
3. Once you have selected the required programme, pressing the RIGHT button briefly will start the delivery of that treatment programme. The RIGHT button also indicates whether you have a good 'connection' or not. GREEN confirms you have a good connection, whereas RED indicates that you have not - and you will need to adjust the leg strap, perhaps adding more ArcEquine coupling gel to achieve a good connection.
4 After 30 seconds, the light under the RIGHT button will turn OFF to save battery power and the small light at the top will change from 'solid' to 'flashing', and will continue to do so throughout the delivery period.
Briefly pressing the RIGHT button again will turn ON the light under the RIGHT button and the small light at the top will change back to 'solid' for a further 30 seconds.
5. We suggest applying a protective stable bandage or boot over the unit for the treatment period.
6. At the end of the three hour delivery period, the ArcEquine unit will switch itself off, waiting for you to remove it from your horse or pony. If you wish to remove it before the delivery of the treatment is complete, you can switch it off by pressing and holding the LEFT button until you hear a 'beep', then release.
To see how to put an ArcEquine unit onto your horse or pony, take a look at this short video too ... https://youtu.be/95VLhWiRKRM
No comments:
Post a Comment